About The Controls On The Air Conditioner; Controls - Panasonic CW-XC103VU Installation And Operating Instructions Manual

About the Controls on the Air Conditioner

Controls

Model: CW-XC118HU
2
4
Precaution: The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
OPERATION BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons. When you first turn it on, the air conditioner is on the
High cool mode and the temp. at 72°F (22°C).
OPERATION MODE SELECTION BUTTON
Every time you push this button, it will toggle between COOL and FAN.
ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If
the unit is operating, this button controls the time it will be turned off. If the unit is off state, this button
controls the time it will start. Every time you push this button, the remaining time will be set as follows.
- Stopping operation
• (1Hour 2Hours
10Hours 11Hours
• The Setting Temperature will be raised by 2°F(1˚C) 30min. later and by 2°F(1˚C) after another 30 min.
- Starting operation
• (1Hour 2Hours
10Hours 11Hours
FAN SPEED SELECTION BUTTON
Every time you push this button, it is set as follows.
[High(F3) Low(F1)
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a
range of 60°F to 86°F by 1°F (16°C to 30°C by 1°C).
Select the lower number for lower temperature of the room.
REMOCON SIGNAL RECEIVER
6
6
3
5
3Hours 4Hours 5Hours
12Hours 0Hour
3Hours 4Hours 5Hours
12Hours 0Hour
Med(F2) High(F3) ...]
6
5
2
1
6Hours 7Hours
1Hour 2Hours ... )
6Hours 7Hours
1Hour 2Hours ... )
5
OPERATION
TEMP
TIMER
MODE FAN SPEED
8Hours 9Hours
8Hours 9Hours
1
3
4