Required Tools And Equipment; Installation Steps; Wall Mounting - Dell Networking W-7024 Installation Manual

Figure 10:
Mid-Mount Rack Installation
NOTE: Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation.
Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord.
Table or Shelf Installation

Required Tools and Equipment

Rubber feet
l

Installation Steps

1. Attach the rubber feet to the bottom of the controller (see
2. Place the controller on the desired flat table or shelf.
Figure 11:
Attaching Rubber Feet

Wall Mounting

An optional accessory kit (SPR-WL2-MNT, must be purchased separately) allows mounting the W-7024 controller
to a wall.
Dell Networking W-7024 Controller | Installation Guide
Figure 11).
Installation | 22