Specifications, Safety, And Compliance; W-7024 Specifications; Physical; Power Supply Specifications - Dell Networking W-7024 Installation Manual

Table of Contents

Advertisement

W-7024 Specifications

Physical

Device Dimensions (without mounting brackets) (HxWxD): 1.72" x 17.40" x 12.32" (4.37 cm x 44.2 cm x 31.3
l
cm)
Device Weight: 11.303 lbs (5.127 kgs)
l

Power Supply Specifications

580 W Integrated Power Supply
l
AC Input Voltage: 115 VAC to 230 VAC
n
AC Input Current: 6.3 A
n
AC Input Frequency: 47 to 63 Hz
n

Operating Specifications

Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
l
Operating Humidity Range: 10% to 90% (RH), non-condensing
l

Storage Specifications

Storage Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
l
Storage Humidity Range: 10% to 95% (RH), non-condensing
l

Safety and Regulatory Compliance

NOTE: For country specific restrictions and additional safety and regulatory information, refer to the Dell Networking W-Series
Safety, Environmental, and Regulatory Information document included with this product.
CAUTION: The Dell controllers must be installed by a professional installer. The professional installer is responsible for ensuring
that grounding is available and it meets applicable local and national electrical codes.
ATTENTION: Les contrôleurs Dell doivent être installés par un installateur professionnel. Cet installateur doit s'assurer que ces
appareils sont correctement mis à la terre et que le circuit de mise à la terre est conforme aux codes électriques locaux et
nationaux en vigueur.
Dell Networking W-7024 Controller | Installation Guide
Chapter 3

Specifications, Safety, and Compliance

Specifications, Safety, and Compliance | 27

Advertisement

Table of Contents
loading

Table of Contents