Creating The Device Driver Media For Windows Driver Installation; Downloading Drivers For Perc S140 From The Dell Support Website For All Operating Systems; Downloading Drivers From The Dell Systems Service And Diagnostic Tools Media For Windows - Dell PowerEdge User Manual

Creating the device driver media for Windows driver
installation
Downloading drivers for PERC S140 from the Dell support
website for all operating systems
1 Go to dell.com/drivers.
2 In the Product Selection section, enter the service tag of your system in the Service Tag or Express Service Code field.
NOTE: If you do not have the service tag, select Automatically detect my Service Tag for me to allow the system to
automatically detect your service tag, or select Choose from a list of all Dell products to select your product from the
Product Selection page.
3 Select the Operating System, Category, Release Date, and Importance from the respective drop-down lists.
The drivers that are applicable to your selections are displayed.
4 Download the drivers that you require to a USB drive, CD, or DVD.
5 During the operating system installation, use the media that you created with the Load Driver option to load mass storage drivers. For
more information on reinstalling the operating system, see the operating system document at dell.com/operatingsystemmanuals.
NOTE: For systems with NVMe PCIe SSD, ensure the S140 driver is installed to discover the RAID disk in your operating
system environment.
NOTE: During the Windows OS installation using the onboard optical disk drive, while loading the S140 driver, a warning
message may appear:
and then click OK , when SATA is in RAID mode. Perform the following steps to proceed with the installation:
a Click OK.
b Close the warning window.
c Click Install Now, and follow the instructions on the screen.
Downloading drivers from the Dell Systems Service and
Diagnostic Tools media for Windows
1 Insert the Dell Systems Service and Diagnostics Tools media in your system.
The Welcome to Dell Service and Diagnostic Utilities screen is displayed.
2 Select your system model and operating system.
For the list of supported operating systems, see
3 Click Continue.
4 From the list of drivers displayed, select the driver you require.
5 Select the self-extracting zip file and click Run.
NOTE: In Microsoft Windows Server 2012 R2, use the Dell Update Package(DUP)
file.
6 Copy the driver to a CD, DVD, or USB drive.
Repeat this step for all the drivers you require.
7 During the operating system installation, use the media that you created with the Load Driver option to load mass storage drivers.
For more information on reinstalling the operating system, see the relevant section for your operating system.
42 Installing the drivers
No new device drivers were found. Make sure the installation media contains the correct drivers,
Supported operating systems.