IFM Electronic ecomot300 Supplementary Device Manual page 22

ifm
Getting started
► In the default setting 4
PDOs of input data and 4
PDOs of output data are
configured with a data
length of 8 bytes each.
This is the so-called
[Predefined Connection
Setup]
► Confirm with [OK]
► Click on the symbol
[SAVE] ( figure)
or:
select [File] > [Save as...]
to save the configuration
► Please memorise the
memory location of the file
on the hard disk
22
Supplementary device manual Interface CANopen in the AS-i controllerE
Connect a Schneider Premium controller via CANopen