Child Tray - Nuna PEPP Instructions Manual

Before attaching the PIPA series infant carrier, recline the
seat back to position 1, by unzipping the outer zippers.
1
- To attach the infant carrier, place the infant carrier on
the infant car seat adapters. A "click" sound means the
infant carrier is attached.
2
- To remove the infant carrier, push the stroller release
buttons on the infant carrier (1) and lift up (2).
Remove the infant carrier before folding.
To remove the infant car seat adapters, unlatch the infant car
seat adapters from the seat frame.
Then reattach the fabric to the seat frame and secure the
hook and loop.

Child Tray

3
- Insert the end of the child tray into the child tray mount
on the occupant's right side. A "click" sound means the
child tray is securely attached.
4
- To remove the child tray, press the child tray release
button (1), and pull the child tray out (2).
Always secure the child with the harness. The child tray
is not a restraint device.
Remove the child tray before folding.
24 PEPP next instructions
1
click
2
2
1
1
3
4
2
1
PEPP next instructions 25