Accessories; Infant Car Seat Adapters - Nuna PEPP Instructions Manual

Accessories

Infant Car Seat Adapters

Only use Nuna infant car seat adapters with this
product.
Nuna PIPA series infant carriers can be used with PEPP next
using the included infant car seat adapters.
For PIPA series infant carrier assembly and usage, please
refer to the infant carrier instruction manual.
Before attaching the car seat adapters, remove the canopy
(p. 16).
1
- Unfasten the hook and loop from the side of the seat
frame.
2
- Pull and unsnap the fabric from the seat frame.
3
- Unlatch and open the infant car seat adapters, locating
the numbers on the inside.
4
- Place infant car seat adapter 1 around the left side of the
seat frame, with the arrow pointing down. The number
should be under the seat frame and the adapter should
align with the gray lines on the top of the seat frame.
5
- Close the infant car seat adapter over the top of the seat
frame.
6
- Pull the adapter end toward the seat frame. A "click"
sound means the car seat adapter is attached.
Repeat on the right side with infant car seat adapter 2.
PEPP next instructions
22
1
2
3
4
5
6
click
PEPP next instructions
23