Recording Cds - Panasonic SC-PM25 Operating Instructions Manual

3
2
1
2
REV MODE
3
SELECTOR
4
OPEN/CLOSE
5
REC
18
RQT5717
5
1 1
4
side to be recorded
facing up
TUNED ST MONO kHz MHz dB
PRGM AUTO
1 -
1-REC
PLAY
REV FWD
RANDOM REC
TUNED ST MONO kHz MHz dB
PRGM AUTO
1 -
1-REC
PLAY
REV FWD
RANDOM REC
TUNED ST MONO kHz MHz dB
PRGM AUTO
1 - 1-REC
PLAY
REV FWD
RANDOM
REC
Tape direction

Recording CDs

Normal recording
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
1
Insert the cassette with the exposed
tape facing left.
Tape direction is automatically set to "
2
Press [REV MODE] on the remote
control to select the reverse mode.
Every time you press the button:
: One side is recorded.
,
3
Press [SELECTOR] to select the CD
mode.
4
Press [OPEN/CLOSE c] to open the
CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE c c c c c ] to close the CD tray.
5
Press [[REC/ J] to start recording.
• If you selected " " in step 2, the direction will automatically
change to " " when recording starts.
• The recording will start from the first track.
To stop recording
Press [STOP L].
The recording and the CD will stop.
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
To record on reverse side
Before recording, press [TAPE 2 3] twice and immediately there-
after [STOP L].
The tape direction will be shown as "
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1 1 1 1 1 After step 4, program the track(s) you want (\ steps 2-4 on page
14).
2 2 2 2 2 Press [[REC/ J] to start recording.
"
FWD
".
REV