Recording Cds - Panasonic SC-PM10 Operating Instructions Manual

2
4
2
STOP STOP
3
OPEN CLOSE OPEN CLOSE
4
REC REC

Recording CDs

• Tracks are recorded in the order in which they are found
on the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
1
3
2
3
4
To stop recording
Press [STOP L].
The recording and the CD will stop.
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
To record from a specific point on a tape
Before recording, advance the tape to the point from where
you want to start recording.
1
After step 3, program the track(s) you want (\ steps 2-4
2
on page 14).
Press [[REC/ J] to start recording.
REC
Normal recording
Insert the cassette to be recorded on.
(\ page 15)
Press [STOP L] to select the CD mode.
Press [OPEN/CLOSE c] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE c c c c c ] to close the CD tray.
Press [[REC/ J] to start recording.
The recording will start from the first track.
To record programmed tracks
17
RQT6675