Connections - Panasonic SC-PM25 Operating Instructions Manual

A
75Ω coaxial
cable
(not included)
B
AM outdoor antenna (not included)
N T
A M A
C
Analog player
(not included)
FM Outdoor antenna
(not included)
Shield braid
Core wire
5-12m
(L)
(R)
AUX
R L
Rear panel of this unit

Connections

Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
A
FM Outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
1 1 1 1 1 Remove a piece of the outer vinyl insulator.
2 2 2 2 2 Twist the shield braid.
3 3 3 3 3 Expose the core wire.
Note
An outdoor antenna should be installed by a qualified technician
only.
B
AM outdoor antenna
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a
window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lighting. Never use
an outdoor antenna during an electrical storm.
External unit connections
• Make sure that the power supply for all components has been
turned off before making any connections.
• For details, refer to the operating instructions of the unit which are
to be connected.
• All peripheral components and cables sold separately.
C
Connecting analog equipment
An analog player with a built-in phono equalizer can be connected.
When units other than those described are to be connected, please
consult your audio dealer.
7
RQT5717