Connections - Panasonic SC-PM25 Operating Instructions Manual

1 1
FM indoor
antenna
2 2
AM loop antenna
3 3
Grey
Blue
6
RQT5717
1
2
3
To household
AC outlet
GND
Red
Black

Connections

• Plug the AC power cord into a household AC outlet only after all
other connections have been made.
• To prepare the AM loop antenna wire and speaker cords, twist the
vinyl cover tip and pull off.
1
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where
radio signals are received with the least amount of
4
interference.
Note
For the best reception :
An FM outdoor antenna is recommended (\ page 7.)
2
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Put the antenna where the reception is best
and interference is minimal.
3
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever
of the same color so (+) and (–) are correct. Never allow the
exposed wires to contact each other when connected.
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Caution
•
Use the speakers only with the re-
commended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may
result in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
•
Do not attach these speakers to walls or
ceilings.
4
Connect the AC power cord
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.