Required Tools; Furnace Clearances And Accessibility - A-Maize-Ing Heat NRP620-10 Owner's Manual

Required Tools

Flat-bit screwdriver
Phillips screwdriver
5/16" nut driver
3/8" nut driver

Furnace Clearances and Accessibility

The A-Maize-Ing Heat® furnace can be installed on a combustible floor if a non-combustible material is
placed directly under the ash removal door and chimney connector. The mat is to extend at least 16"
in front of and 8" to each side of the ash removal drawer and 2" either side of the chimney connector.
Recommended distances for ease of use and serviceability:
Top 32"
Opposite side from bin 24"
Front 36"
Rear-most surface 18"
NRP620-10 OMEPAPV20161017 (ENGLISH) REV 1
18 "**
24 "*
36 "*
Recommended Clearances
7/16" wrench
7/16" socket
Drill motor and ¼" drill bit
12 "
Page 11 of 42