Related Manuals for Bull 20505CE
Summary of Contents for Bull 20505CE
- Page 1 ASSEMBLY INSTRUCTIONS FOR SEARING BURNER – ONLY FOR FIRST TIME USE. ITEM: 20505CE This burner can be installed in all Bull gas grills and these instructions are intended for CE models. ALWAYS PERFORM THIS OPERATION WITH A COLD GRILL...
- Page 2 Contents in your searing burner kit: Qty.1 searing burner Qty.1 short cross fire connector tube Qty.2 screws...
- Page 3 The searing burner must always replace the burner in the far right of your BBQ grill. Remove the cooking grate (A)and the flame tamer(B).Remove the burner (C)on the far right.Make sure you would have followed your grill manual instructions and took out the burner retention cotter pins(D).
- Page 4 Now remove the 2 philips bolts of the cross fire connector tube . The purpose of the cross fire connector tube is an extra CE safety feature that will help re-ignite a burner which may have been extinguished by using the flame of the adjacent burners.