Rear View Fsa 740 Edition; Measurement Cable With Voltage Divider; Connection Panel Fsa 740 Edition; Multiple Socket Outlet - Bosch FSA 740 Edition Original Instructions Manual

en 22 | FSA 740 Edition | Product description
3.3.2

Rear view FSA 740 Edition

1
7
6
5
11-16V
4597758/3Wo
Abb. 2: Rear view FSA 740 Edition without back panel
1 Measuring Unit
2 PC/laptop
3 Printer (PDR 377)
4 BEA 055
*)
5 ON/OFF switch with socket strip
6 Cover panel
7 KTS module
*)
sometimes included in special accessories
*)
3.3.3

Measurement cable with voltage divider

The measurement cable with voltage divider
(1 687 224 300) is used for voltage measurements up to
60 V DC/30 V AC/300 V ACpeak. The accessory set (1 687
016 118) contains test prods (1 684 485 434/... 435) and
pick‑off clips (1 684 480 403/... 404) as accessories for
the measurement cable with voltage divider. Never use
the measurement cable with voltage divider to measure
mains or similar voltages.
1 689 989 297 | 2016-05-05
3
GF 3 GF 2
O2 AF I
4
N0
3.3.4

Connection panel FSA 740 Edition

DANGER – Risk of electric shock from ex-
cessively high measurement voltage!
The measurement of voltages in excess of
60 V DC/30 V AC/42 V ACpeak using CH1/
CH2 multi measurement cables will result in
injury, heart failure or fatal electric shocks.
¶
Never use CH1/CH2 multi measurement
cable to measure mains or similar voltag‑
es.
15+ - 1
2
1 2 3 4
Abb. 3: Connection panel FSA 740 Edition (viewed from under-
neath)
1 Temperature sensor
2 Connecting cable B+/B–
3 Primary connecting cable (UNI IV)
4 Clip-on sensor or
Adapter cable 1 684 465 513 for clip-on sensor
5 RS 232 serial interface (no function)
6 Sensor KV–
7 USB connection for data connection PC
8 Sensor KV+
9 Voltage supply for measuring unit (power supply unit)
10 CH1 multi measurement cable or measurement cable with volt-
age divider or amps clamp 30 A
11 CH2 multi measurement cable or measurement cable with volt-
age divider or amps clamp 30 A or amps clamp 1000 A
12 Stroboscope
13 Air pressure measurement
14 Liquid pressure sensor
Always connect adapter cable 1 684 465 513 between connec-
*)
tion bushing FSA 740 Edition and the connection cables for
the clip-on sensor when performing engine speed measurement
using the clip-on sensor.
3.4

Multiple socket outlet

The power strip is designed for the nominal
voltage of 240 V AC and the rated current of
13 A. These values must not be exceeded.
3.5

Special accessories

Information on special accessories, such as vehicle‑spe‑
cific connection cables, can be obtained from your au‑
thorized Bosch dealer.
D X
KV- KV+ CH1 CH2
COM USB 15V DC
5 6 7 8 9 10 11 12 13 14
*)
Robert Bosch GmbH
45977541-Ko