Fsa 760 Edition Rear View; Measurement Lead With Voltage Divider; Fsa 760 Edition Terminal Strip; Multiple Socket Outlet - Bosch FSA 760 Original Instructions Manual

3.3.2

FSA 760 Edition rear view

1
7
6
5
11-16V
4597758/3Wo
Fig. 2: FSA 760 Edition rear view without rear wall
1 Measuring unit
2 PC
3 Printer (PDR 377)
4 BEA 055
1)
5 ON / OFF switch with socket strip
6 Cover panel
7 KTS modul
1)
sometimes provided as special accessory
1)
3.3.3 Measurement lead with
The measurement lead with voltage divider
(1 687 224 300) is used for voltage measurements up
to 60 VDC/30 VAC/300 VACpeak. The accessory set
(1 687 016 118) contains test prods (1 684 485 434/
... 435) and pick‑off clips (1 684 480 403/ ... 404) as
accessories for the measurement lead with voltage
divider. Never use the measurement lead with voltage
divider to measure mains or similar voltages.
Robert Bosch GmbH
3
GF 3 GF 2
O2 AF I
4
N0
voltage divider xxx
Product description | FSA 760 Edition | 21
3.3.4

FSA 760 Edition terminal strip

DANGER – Risk of electric shock from
excessively high measurement voltage.
The measurement of voltages in excess of
60 VDC/30 VAC/42 VACpeak using Multi
measurement leads CH1 / CH2 will result in
injury, heart failure or fatal electric shocks.
¶
Never use Multi measurement leads CH1 /
CH2 to measure mains or similar voltages.
15+ - 1
2
1 2 3 4
Fig. 3: FSA 760 Edition terminal strip (from below)
1 Temperature sensor
2 Connecting cable B+/B–
3 Primary connecting cable (UNI 4)
4 Trigger clamp or
adapter line 1 684 465 513 for clip-on sensor
5 RS 232 serial interface (no function)
6 Sensor KV–
7 USB connection for data connection PC
8 Sensor KV+
9 Power supply for measuring unit (power pack)
10 Multi measurement lead CH1 or measurement lead with voltage
divider or current probe 30 A
11 Multi measurement lead CH2 or measurement lead with voltage
divider or current probe 30 A or current probe 1000 A
12 Stroboscope
13 Air pressure measurement
14 Liquid pressure sensor
When the speed is being measured with the clip-on sensor,
1)
adapter line 1 684 465 513 (special accessory) must always
be connected between plug socket FSA 760 Edition and the
connecting cables for the clip-on sensor.
3.4

Multiple socket outlet

The power strip is designed for the nominal
voltage of 240 V AC and the rated current of
13 A. These values must not be exceeded.
3.5

Special accessories

Information on special accessories, such as vehicle‑
specific connecting leads, can be obtained from your
authorized Bosch dealer.
KV- KV+ CH1 CH2 D
COM USB 15V DC
5 6 7 8 9 10 11 12 13 14
1)
1 689 989 298 |
en
X
45977541-Ko
2017-03-08