Advertisement
Check the condition of the mains cord regularly.
Do not wind the mains cord round the appliance.
The mains cord of this appliance cannot be replaced. If the mains
cord is damaged, the appliance must be discarded.
Always make sure that the attachments are completely dry - on
the inside as well as on the outside - before you connect them to
the styler.
The attachments will become hot during use. Prevent contact
with the skin.
Never block the air inlet grille.
Keep the appliance away from children.
Always unplug the appliance after use.
Wait until the appliance has cooled down before storing it.
Preparing for use
Hair
Before you start using the Airstylist, comb or brush the hair so
that it is untangled and smooth.
The Airstylist is most effective when the hair is slightly damp.
When your hair is dry, slightly dampen it. Never use the appliance
on wet hair!
Connecting and disconnecting attachments
Do not insert the mains plug into the wall socket until after you have
connected the attachment.
1
Connect the attachment to the styler by aligning the arrows on
the attachment with the arrows on the styler and pressing the
attachment home. (fig. 1)
You will hear a click.
2
To remove the attachment from the appliance, press the release
button and pull the attachment in the direction of the arrow. (fig. 2)
ENGLISH
7
Advertisement
