English - Milwaukee JSPE 135 TQX Instructions For Use Manual

TECHNICAL DATA
Rated input .....................................................................................
Output ............................................................................................
Stroke rate under no–load .............................................................
Lengths of stroke ...........................................................................
Bevel cuts up to .............................................................................
Cutting depth max. in:
Soft- wood ...................................................................................
Hard-wood ..................................................................................
Steel ............................................................................................
Non-ferrous metal ......................................................................
Aluminium ...................................................................................
Ceramics .....................................................................................
Weight without cable .....................................................................
Typical weighted acceleration in the hand-arm area ....................
Typical A-weighted sound levels:
Sound pressure level (K = 3 dB(A)) .............................................
Sound power level (K = 3 dB(A)) .................................................
Wear ear protectors!
Measured values determined according to EN 60 745.
SAFETY INSTRUCTIONS
Please pay attention to the safety instructions in the attached
leaflet!
Appliances used at many different locations including open air
must be connected via a current surge preventing switch.
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes and
apron.
Sawdust and splinters must not be removed while the machine
is running.
Always disconnect the plug from the socket before carrying out
any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
Always use the protective shields on the machine.
Dust that arises when working on wood or using the tool on
industrial material can be dangerous to health. In this case
connect the tool to a suitable suction device.
Do not use cracked or distorted saw blades.
Plunge cuts without pre–drilling a hole are possible with soft
materials (wood, light building materials for walls). Harder
materials (metals) must first be drilled with a hole
corresponding to the size of the saw blade.
The dust that arises when working with this tool can be
detrimental to health and therefore not reach the body. Wear a
suitable dust protection mask.
SPECIFIED CONDITIONS OF USE
This jig saw can cut wood, plastic and metal; it can cut straight
lines, bevels, curves, and internal cut–outs.
Do not use this product in any other way as stated for normal
use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized
documents. EN 60745, EN 55014–1, EN 55014–2, EN 61000–
3–2, EN 61000–3–3, in accordance with the regulations 98/37/
EC, 89/336/EEC
Manager Product Development
21

ENGLISH

Volker Siegle
JSPE 135 TQX (220-240 V)
........................750 W ................................................ 710 W
........................450 W ................................................ 400 W
.............. 800-3000 min .................................. 800-3000 min
-1
........................ 26 mm ...........................................26 mm
...................... 45° ............................................... 45°
...................... 135 mm .........................................135 mm
...................... 100 mm .........................................100 mm
........................ 10 mm ...........................................10 mm
........................ 20 mm ...........................................20 mm
........................ 30 mm ...........................................30 mm
........................ 10 mm ...........................................10 mm
....................... 2,5 kg .............................................2,5 kg
.......................... 4 m/s ............................................4 m/s
2
........................ 88 dB (A) .......................................88 dB (A)
........................ 99 dB (A) .......................................99 dB (A)
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the
system voltage indicated on the rating plate. It is also possible
to connect to sockets without an earthing contact as the design
conforms to safety class II.
Under the effect of extreme electromagnetic interferences from
the outside, temporary variations in the speed of rotation could
arise in particular cases.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
Use only Milwaukee accessories and Milwaukee spare parts.
Should components need to be replaced which have not been
described, please contact one of our Milwaukee service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the ten-digit No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Milwaukee Electric Tool, Max-Eyth-Straße 10,
D-71364 Winnenden, Germany.
SYMBOLS
Always disconnect the plug from the socket before
carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned to
an environmentally compatible recycling facility.
JSPE 135 TQX (110 V)
-1
2