Table of Contents
Advertisement
Grounding
Before operating the pump, ground the system as
explained below. Read the warnings on page 3.
Ground all of this equipment:
•
Pump: use a ground wire and clamp. See F
Loosen the grounding screw (X). Insert one end of a
2
1.5 mm
(12 ga) minimum ground wire (Y) into the
pump's grounding clamp (8) and tighten the screw
(X) securely. Connect the other end of the wire to a
true earth ground. For a ground wire and clamp,
order Part No. 238909.
•
Air and fluid hoses: Use only electrically conductive
hoses.
•
Air compressor: Follow manufacturer's recommen-
dations.
•
Fluid supply drum: Follow your local code.
•
All solvent pails used when flushing: Follow your
local code. Use only metal pails, which are conduc-
tive, placed on a grounded surface. Do not place the
pail on a nonconductive surface, such as paper or
cardboard, which interrupts the grounding continu-
ity.
. 4.
IG
F
. 4. Grounding the Pump
IG
Installation
X
Y
TI2085A
9
Advertisement
Table of Contents
