Led Light Strip - Zephyr Roma Groove Use, Care And Installation Manual

Maintenance
ZEPHYRONLINE.COM

LED Light Strip

In the unlikely event that your LED strip fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Light Strip Removal (FIG. F):
1. Remove aluminum mesh filters.
2. Remove light panel by two screws.
3. Disconnect LED light strip quick connector.
4. Push in the two side clips on the ends of the LED strip.
5. Push LED light strip through the light panel opening.
Push the clip
FIG. F
27
Roma Groove Use, Care, and Installation Guide