Advertisement
www.zephyronline.com
I! II_J
C
RO
A
ZRA-E30AS
ZRA-E36AS
ZRO-E30AS
ZRO-E36AS
iim
m
m
1/)
C
m
C
(3
ZRA-E3OAS
ZRA-E36A
S
Voltage
120V 60Hz
Power Consumption
Total: 180W
Lamp: Max 50W x2
Fan:
80W
Model number:
Serial
number:
Dealer
Name:
Date of Purchase:
ZRO-E30A
S
ZRO-E36A
S
Voltage 120V 60Hz
Power Consumption
Total: 400W
Lamp: Max 50W x2
Fan:
300W
APR07.0301
© Zephyr
Corporation
Advertisement
Table of Contents
Related Manuals for Zephyr Roma ZRO-E36AS
Summary of Contents for Zephyr Roma ZRO-E36AS
- Page 1 ZRO-E36A ZRA-E36A Voltage 120V 60Hz Voltage 120V 60Hz Power Consumption Power Consumption Total: 180W Total: 400W Lamp: Max 50W x2 Lamp: Max 50W x2 Fan: Fan: 300W Model number: Serial number: Dealer Name: Date of Purchase: APR07.0301 © Zephyr Corporation...
- Page 2 Illl O0 READ AND SAVETHESE INSTRUCTIONS WARNING- TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY PERSONS, OBSERVE THE FOLLOWING: a ) Use this unit only in the manner intended by the manufacturer.If you have questions, contact the manufacturer. b) Before servicing or cleaning...
-
Page 3: Control Device
c)Clean ventilating fans f requently. Grease should not b eallowed toaccumulate onfan orfilter. d)Use proper pan size. A lways use cookware appropriate forthe size ofthe surface element. WARNING- TO REDUCE THE RISK OF INJURY TO PERSONS INTHE EVENT OF ARANGE TOP GREASE FIRE, OBSERVE THE FOLLOWINGa;... -
Page 5: Installation
INSTALLATION MOUNT HEIGHTS & CLEARANCE Minimum mount height between range top to hood bottom should be no less than 28". IIIIIIIIIIIIIII Maximum mount height should be no higher than 36". - 48' It is important to install the hood at the proper mounting height. - Page 6 INSTALLATION DUCTING NEVERexhaust air or terminate duct work into spaces between walls, crawl spaces, ceilings, attics or garages. All exhaust must be ducted to the outside. Use metal ductwork only. Fasten all connections with sheet metal screws and tape all joints with certified silver tape or duct tape.
-
Page 7: Specifications
INSTALLATION SPECIFICATIONS ..29-15/I6", 35-7/I6" ELECTRICAL All electrical work must be performed by a qualified electrician or person with similar technical know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. - Page 8 INSTALLATION INSTALLATION Mounting the Range Hood 1, Measure from range top to hood bottom (28" rain) Level and mark line A, _'_Duct Cover Bracket 2, Plum and mark center line. 3. Mark mounting height line B. ( 12-5/32 " from line A) 4.
-
Page 9: Ductless Conversion
INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, hood functions as a recirculating hood rather than an exhaust hood. Fumes exhaust from cooking are drawn filtered by a set of optional carbon filters. -
Page 10: Controls And Features
CONTROLS & FEATURES CONTROLS & FEATURES Blower On/O':f L ghts On!Off Blower Speed Selection Blower On/Off The blower will be switched on or off by pressing: Blower Speed Selection Select one of three speed levels by pressing: Lights On/Off Switch lights on and off by pressing: Page 6... -
Page 11: Maintenance
MAINTENANCE CLEANING Surface Maintenance: Clean periodically with hot soapy water and a clean cloth. Do not use corrosive or abrasive detergent, or steel wool/scouring pads which will scratch and damage the surface. For heavier soil use a liquid degreaser. After cleaning you may use non abrasive stainless steel polish/cleaners... - Page 12 MAINTENANCE LIGHTS Replacing Light Bulbs Make sure all power is turned off and bulbs are not hot. Remove by turning bulb counter clockwise. If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approx, the diameter of the bulb and turn.