Table of Contents
Advertisement
Installation
Notes on con nec tions
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an
option, you may need to fashion a cable to suit the component concerned.
• Read the instruction manual for each system component care ful ly before connecting it.
• If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will
be necessary to connect a TBC (time base corrector).
CAUTION
When using "Nut type" RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
Connecting the Antenna / Cable to the RF IN Terminal
Antenna Connection
For proper reception of digital and analog VHF/UHF channels, an external antenna is required. For best reception, an
outdoor antenna is recommended.
VHF Antenna
Mixer
12
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
UHF Antenna
RF Coaxial Cable
VHF/UHF Cable In terminal on the
back of the Projection Display
Hide quick links:
Advertisement
Table of Contents
