Table of Contents
Advertisement
INSTALLA
TION
Installation
Television
Location
This unit can be used as an entertainment
center. Consult your dealer for available options.
[]
Avoid excessive sunlight or bright lights, including reflections.
[]
Keep away from excessive
heat or moisture. Inadequate
ventilation may cause internal
component failure.
[]
Fluorescent lighting may reduce remote control transmitting range,
{3
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components. For best results:
[]
Use 75-ohm coaxial shielded cables.
[]
Use appropriate input and output connectors, that match your component connectors.
[]
Avoid long cables to minimize interference.
AC Power
Supply
Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WiTH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
Polarized p lug
INSERTED TO PREVENT BLADEEXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR
PINCHED, PARTICULARLYAT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE
THEY EXIT FROM THE APPARATUS,
Cable
/ Antenna
Connection
For proper
reception,
either a cable or antenna connection
is required.
Cable Connection
IncomingCable
from
Cable Company
Connect the cable supplied by your local cable company to ANTi
connection on back of television. Select cable mode and ANT1 in SET UP
_l,
menu under Prog Chan (Program Channels).
_
Note:
A cable converter
box may be required
for proper reception.
75OhmVHF/UHF
Check
with
your
local
cable
company
for
compatibility
on backofPTV
requirements.
Antenna Connections
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
Connect
home antenna to ANT1 connection on back of
Incoming Cable from
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
--:,
._ Cable Preset
Cable Mode is preset at the factory,
Antenna usersmustchange to33/Mode and
t ANT 1 in the Set Up menu,
Home Antenna
la
Advertisement
Table of Contents
