Table of Contents
Advertisement
INSTALLATION
Installation
Television
Location
This unit can be used as an entertainment center. Consult your dealer for available options.
CI
Avoid excessive sunlight or bright lights, including reflections.
[]
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
[]
Fluorescent lighting may reduce remote control transmitting
range.
[]
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components.
For best results:
[]
Use 75-ohm coaxial shielded cables.
[]
Use appropriate
input and output connectors, that match your component
connectors.
[]
Avoid long cables to minimize interference.
AC Power
Supply
Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLEOR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT
PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna
Connection
For proper
reception,
either a cable or antenna
connection
is required.
Cable Connection
Connect the cable supplied by your local cable company to ANT1 connection
on back of television. Select cable
mode and ANT1 in SET UP menu under Prog Chan (Program Channels).
Note:
A cable converter box may be required for proper reception.
Check with your local cable company for
compatibility
requirements.
Polarized plug
Incoming
Cable from
Cable Company
75 Ohm VHF/UHF
on back of PTV
Antenna
Connections
For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is
recommended.
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the
Incoming Cablefrom
SET UP menu under Prog Chan.
[\_/"
--
_,--
Cable Preset
/Cab_e Me--at
the factory.
/ Antenna users must change to TV Mode and
[ ANT 1 in the Set Up menu.
Home Antenna
4e
Advertisement
Table of Contents
