Installation; Television Location; Optional Cable Connections; Ac Power Supply Cord - Panasonic PT-51G35 Operating Instructions Manual

Color video projection system
Hide thumbs Also See for PT-51G35:
Table of Contents

Advertisement

INSTALLA
TION
Installation
Television Location
This unit can be used as an entertainment
center. Consult your dealer for available options.
0
Avoid excessive sunlight or bright lights, including reflections.
0
Keep away from excessive
heat or moisture.
Inadequate ventilation
may cause internal
component failure.
£3
Fluorescent lighting may reduce remote control transmitting
range.
17
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components.
For best results:
0
Use 75-ohm coaxial shielded cables.
0
Use appropriate
input and output connectors, that match your component
connectors.
E3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK MATCHWIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Polarizedplug
Non-Poladzedplug
Cable / Antenna Connection
For proper
reception,
either
a cable or antenna connection
is required.
Cable Connection
Incoming Cable from
Connect
the cable
supplied by your
local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP
menu under Prog Chan (Program Channels).
Note:
A cable converter
box may be required for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements.
Cable Company
2!,
75 OhmVHF/UHF
on back of TV
Antenna Connections
For proper receptionof VHF/UHF channels,an externalantenna is required. For
best receptionan outdoorantenna is recommended•
Connect home antenna to ANT1 connection
on
back of
Incoming Cable from
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
--
--
Cable Preset
f
Cable Mode is preset at the factory.
Antenna i
users must change to TV mode and select
ANT1 in the Set Up Menu under ProgChan.
Home Antenna
E1

Advertisement

Table of Contents
loading

Table of Contents