Table of Contents
Advertisement
INSTALLA
TION
Installation
Television
Location
This unit can be used as part of an entertainment
center.
Consult your dealer for available
options.
O
Avoid excessive sunlight or bright lights, including reflections.
(3
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
(3
Fluorescent lighting may reduce Remote Control transmitting range.
£3
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components. For best results:
[3
Use 75-ohm coaxial shielded cables.
[3
Use appropriate input and output connectors, that match your component connectors.
[3
Avoid long cables to minimize interference.
AC Power Supply
Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCHWIDE BLADEOF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLYINSERT. DO NOT USE A PLUG WITH A
Polarized
Plug
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTEDTO PREVENT BLADE EXPOSURE.
_] ;_
Cable / Antenna
Connections
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANTt
connection on back of television. Select cable mode and ANT1 in SET UP
menu under Prog Chan (Program Channels).
Incoming Cable from
Cable Company
Note:
A cable converter box may be required for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements.
75 Ohm VHF/UHF
on back of TV
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
•
Connect home antenna to back of television.
Select TV
mode and ANT1 in the SET UP Menu under Prog Chan.
-- Cable Preset
I Cabls__at
the factory,
I Antennausersmustchangeto TV Mode and
[ ANTt in the Set Up Menu underProgChan,
Incoming Cable from
Home Antenna
[]
Advertisement
Table of Contents
