Compatible Formats - Panasonic PT-52LCX35-B Operating Instructions Manual

Multimedia projection hdtv

Table of Contents

Procedure

Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.

• If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the

Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.

Press TV/VIDEO to select HDMI input.

By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminals of

this Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is

for use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)

Notes:

• Select the HDMI input position by pressing the TV/VIDEO button. (P. 32)

• The HDMI IN terminals can only be used with 1080i, 720p, 480p and 480i picture signals.

• If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.

• Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.

• With HDMI connection, depending on the signal, the picture may be displayed with unnatural colors (as if red and blue are

reversed). Refer to "Color Corr." on page 41.

• If the external device has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable*

• When the DVI to HDMI adaptor cable*

Enquire at your local digital device retailer shop.