Table of Contents
Advertisement
Installation
INSTALLATION
Television
Location
This unitcan be used as an entertainment c enter. Consultyourdealerfor availableoptions.-"
O
Avoidexcessivesunlight or brightlights,including reflections.
13 Keep away from excessiveheat or moisture. Inadequateventilationmay cause internal
component f ailure.
O
Fluorescent lighting may reduceRemoteControltransmitting range.
O
Avoid magneticequipment,including motors, f ans,or externalspeakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm coaxial shielded cables,
O
Check type of output and input connectors on your components.
O
Determine required cable lengths,
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRICSHOCK, MATCHWIDE BLADEOF PLUGTO
WIDE SLOT OF AC OUTLET AND FULLYiNSERT. DO NOT USE A PLUGWITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
iNSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELSTHAT ARE
NON-POLARIZED,THE USE OF AN AC ADAPTORCONNECTOR MAY
BE NECESSARY.
Polarized plug
Cable / Antenna
For proper reception, either a cable or antenna connection is required,
Cable Connection
Connect the cable supplied by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check
with your
local Cable
company
for compatibility
requirements.
Antenna
Connection
Incoming Cable from
Cable Company
21,
75 Ohm VHF/UHF
on back of PTV
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception an outdoor antenna is recommended,
Antenna Mode must be set to TV in the SET UP menu.
"
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the Set
Up Menu.
Incoming Cable from
Home
Antenna
m
Advertisement
Table of Contents
