Related Documents - SIM Tech SIMCom SIM5360 Hardware Design

Low-level
V
OL
output voltage
High-level
output
IOH
current
Low-level
output
IOL
current
Input
I leakage
IH
current
Input
I leakage
IL
current
Input
C
IN
capacitance
Note: These parameters are for digital interface pins, such as keypad, GPIO, I
under both conditions are presented in the above tables.
SPI and keypad are 1.8v Digital I/O voltage.
2
GPIO, I C and UART are 2.6v Digital I/O voltage.
D. Related Documents
Table 44: Related documents
SN Document name
[1] SIM5360_ATC_V1.00
ITU-T Draft
[2]
recommendationV.25ter
[3] GSM 07.07
[4] GSM 07.10
[5] GSM 07.05
[6] GSM 11.14
[7] GSM 11.11
[8] GSM 03.38
SIM5360_Hardware Design_V1.01
0 0
- 1
- -1
high
- -
low
-1 -
- -
Remark
SIM5360_ATC_V1.00
new
Serial asynchronous automatic dialing and control
Digital cellular telecommunications (Phase 2+); AT command set
for GSM Mobile Equipment (ME)
Support GSM 07.10 multiplexing protocol
Digital cellular telecommunications (Phase 2+); Use of Data
Terminal Equipment – Data Circuit terminating Equipment (DTE –
DCE) interface for Short Message Service (SMS) and Cell
Broadcast Service (CBS)
Digital cellular
Specification of the SIM Application Toolkit for the Subscriber
Identity Module – Mobile Equipment (SIM – ME) interface
Digital cellular
Specification of the Subscriber Identity Module – Mobile
Equipment (SIM – ME) interface
Digital cellular telecommunications system (Phase 2+); Alphabets
and language-specific information
Smart Machine Smart Decision
0.45 V
- mA
- mA
1 uA
- uA
7 pF
2
C, UART, SPI. Digital I/O specifications
telecommunications
telecommunications
64
system (Phase 2+);
system (Phase 2+);
2013-11-22