▶
Memory-Z
Memory-Z
Press <Enter> to enter the sub-menu and the following screen appears.
▶
DIMM1~2 Memory SPD Information
DIMM1~2 Memory SPD Information
Press <Enter> to enter the sub-menu. The sub-menu displays the informations of
installed memory.
▶
Advance DRAM Confi guration
Advance DRAM Confi guration
When the DRAM Timing Mode is set to [Manual], this sub-menu will available. Press
<Enter> to enter the sub-menu.
▶
DRAM Timing Mode
DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEP-
ROM on the DRAM module. Setting to [Auto] enables DRAM timings and the fol-
lowing "Advance DRAM Confi guration" sub-menu to be determined by BIOS based
on the confi gurations on the SPD. Selecting [Manual] allows users to confi gure the
DRAM timings and the following related "Advance DRAM Confi guration" sub-menu
manually.
▶
CAS Latency (CL)
CAS Latency (CL)
This controls the CAS latency, which determines the timing delay (in clock cycles)
before SDRAM starts a read command after receiving it.
MS-7618
3-19