MSI Wind Board D510 Series Manual page 41

▶ Restore On AC Power Loss Restore On AC Power Loss
This item specifi es whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off ] Always leaves the computer in the power off state.
[On] Always leaves the computer in the power on state.
[Last State] Restore the system to the status before power failure or interrupt
occurred.
▶ Wake Up Event Setup Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
▶ Wake up Event By Wake up Event By
Setting to [BIOS] activates the following fi elds, and use the following fi elds to set the
wake up events. Setting to [OS], the wake up events will be defi ned by OS.
▶ Resume From S3 By USB Device Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶ Resume From S3/S5 By PS/2 Keyboard / Mouse Resume From S3/S5 By PS/2 Keyboard / Mouse
These items determine whether the system will be awakened from what power sav-
ing modes when input signal of the PS/2 keyboard/ mouse is detected.
▶ Resume By PCI or PCI-E Device Resume By PCI or PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCI or PCIE device.
▶ Resume By RTC Alarm Resume By RTC Alarm
The fi eld is used to enable or disable the feature of booting up the system on a
scheduled time/date.
MS-7618
3-13