Memory - MSI Wind Board D510 Series Manual

M M
EMORY EMORY
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/index.php?func=testreport
DDR2 DDR2
240-pin, 1.8V 240-pin, 1.8V
Memory Population Rule Memory Population Rule
Please refer to the following illustrations for memory population rules.
1 1
2 2
Important Important
• DDR2 memory modules are not interchangeable with DDR and the DDR2 standard
is not backwards compatible. You should always install DDR2 memory modules in
the DDR2 DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
•
DIMM1 fi rst. DIMM1 fi rst
Due to the chipset resource deployment, the system density will only be detected up
•
to 3+GB (not full 4GB) when each DIMM is installed with a 2GB memory module.
64x2=128 pin 64x2=128 pin
MS-7618
56x2=112 pin 56x2=112 pin
DIMM1
DIMM2
DIMM1
DIMM2
Installed
Empty
2-3