MSI Wind Board D510 Series Manual page 22

▍
Hardware Setup Hardware Setup
Chassis Intrusion Connector: JCI1 Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
Fan Power Connectors: SYSFAN1~2 Fan Power Connectors: SYSFAN1~2
The fan power connectors support system cooling fan with +12V. When connecting the
wire to the connectors, always note that the red wire is the positive and should be con-
nected to the +12V; the black wire is Ground and should be connected to GND.
Front Panel Connector: JFP1 Front Panel Connector: JFP1
These connectors are for electrical connection to the front panel switches and LEDs.
The JFP1 is compliant with Intel
2-8
SYSFAN1/ 2 SYSFAN1/ 2
Front Panel I/O Connectivity Design Guide.
®
JFP1 JFP1