Tele System TS6511 HD User Manual page 27

3 First time installation
When all the connections on the receiver are ready and the AC main lead is plugged in, the receiver should
start up automatically. If this does not happen, press the ON/OFFbutton on the front panel or on the remote
control. A welcome menu will be displayed where you can set the menu and audio languages (point 1), the
channels search parameters (points 2 and 3):
1. OSD Language: use the arrows keys ◄/► to select the preferred language. The menu language will be
the chosen language. Press the arrows key ▼/▲ to go to the next item.
2. Country Setting: use the arrows keys ◄/► to select the preferred language. The menu language will be
the chosen language. Press the arrows key ▼/▲ to go to the next item.
CAUTION
A wronged country setting involves that during automatic channel scan may not be detected all the channels availables.
3. Channel Search: Select the arrow key ► to start the automatic search of channels. To wait till the
search has finished. To confirm press the OK key.
CAUTION
The receiver use as default the logical channel numbering (LCN). Therefore, after the scanning, the channels will be
positioned in the list with broadcaster order.
If the user needs to disable that function, please enter the system configuration menu with MENU and change the LCN to
Off. After LCN deactivation will be necessary to memorize again the channels..
4. Time setting: on viewing mode press MENU key and select Time submenu (par. 4.3). It is possible to
set the corrected time. To save the setting press OK.
4 Receiver settings
The first time installation procedure (chapter 3) will allow the receiver to be used with its basic functions.
However the receiver offers many more advanced features and options that are illustrated in the following
sections.
4.1 Password
To modify some settings and view certain channels a password (PIN code) has to be entered. The factory
password is "000000" (six zeros) but it could be changed by pressing MENU and selecting the submenu
System and then Set password.
CAUTION
Please keep the PIN code in a safe place. If you forget the PIN please use the universal code 650200 to access to the
menu Set password and to digit a new one.
Some submenus could be blocked by factory setting (manual and automatic search channel submenu for example).
It is possible also to define the age limit into submenu Parental Control. The receiver will use the age limit to
block with PIN request the channels that signal an upper age level.
4.2 Channel scan
The first time installation procedure perform an automatic channels search and save any channels available
at that moment. However later channel searches may become necessary if, for instance, a new channel
becomes available or when an existing channel changes frequency. To access this function press MENU on
the remote control and select Channel Search. One of the three following options could be selected:
1. Manual full search: a full scan of all digital terrestrial channels received in the area by your antenna.
CAUTION
When a new automatic scan is run, the existing channel list will be lost.
2. Manual single search (only for expert users): into this menu you can perform a single frequency scan.
Use the arrows ◄/► to select the frequency to scan and press OK to confirm.
3. Automatic full search: the receiver is set to perform a full scan by itself. The new channels will be
signalled to the user to memorize them.
4.3 Time setting
To access this function into viewing mode press the MENU key on the remote control and open the submenu
Time. There are two setting available into submenu:

Time Offset = Manual: this the manual setting of time by user. To set the Time Offset on manual. After to
use Time Zone submenu to set the corrected time deflection from global time reference of Greenwich
Mean Time GMT. The deflection of Italy, Rome, for example is +1 during winter time.

Time Offset = Auto:: indicate the Greenwich Mean Time (GMT) time zone. E.g.: Italy has a time zone of
+1 hour (GMT+01:00). Press OK button to save the changes.
CAUTION
Some digital terrestrial services transmit information like EPG and time are strictly linked to the precise time setting of the
receiver. If the information is not displayed correctly, the problem is not caused by the receiver.
TS6511 HD
5