Tele System TS6511 HD User Manual page 25

2 Product description and connections
2.1 Front panel
1. ON/OFF Switch On/Off key
2. IR Infrared sensor for remote control
3. USB USB port to play or record multimedial content
4. CH+ Selection of channel forward
5. CH- Selection of channel backward
6. LED LED indicating the on/off status of receiver
7. DISPLAY Display 7 segments, 4 digits of receiver
2.2 Back panel and connections
CAUTION

It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna before
plugging in the mains lead. When the receiver is powered electrical voltage differences may be created when
plugging in the jacks, which may generate currents that could damage the appliances.

The direct TV SCART connection should always be used as a first operating test, since other more complex
connection sequences may give malfunctions that are not caused by faults or defects of the actual appliances but by
problems of incompatibility.
1. RF IN Terrestrial antenna input
2. RF LOOP THROUGH Output to distribute the terrestrial TV signal to an external TV set.
3. S/PDIF OUT Coaxial digital audio output for home-theatre amplifier
4. SCART TV TV SCART connection to connect to the TV set
5. SCART VCR Video recorder SCART connection
6. AC Supply cable to connect to the electrical network plug AC
7. HDMI Digital audio/video output for LCD TV with HDMI input
230 Volt, 50Hz
TS6511 HD
3