Siemens SITRANS LR 400 Application Manual page 7
Retrofit with an easy aimer lr
Hide thumbs
Also See for SITRANS LR 400:
- Quick start manual (114 pages) ,
- Instruction manual (112 pages) ,
- Instruction manual and users manual (106 pages)
Advertisement
Zone 0, Step Five: Attaching Horn to Easy Aimer LR
1.
Set horn into Easy Aimer hub, lining up the screw
holes.
Zone 0, Step Six: Inserting Bottom PTFE Emitter
1.
Flip assembly, setting horn on
flat surface and insert bottom
PTFE emitter point first.
Easy Aimer LR and SITRANS LR 400 Retrofit
2.
Place Ring 1 on top of unit , beveled side up, and push firmly until botom
PTFE emitter and ring are completely inserted.
NOTE: Ensure that O rings are set properly in their groves. See
Troubleshooting
AG030612
APPLICATION GUIDE
2.
Fasten the four screws using the 5/32" ball-ended
Alan key and screws provided with kit.
Appendix:
on page 9.
7 of 9
Advertisement
