Deciding The Swivel Setting - Dynamic Mounting Slim Down and Out Swivel Mount Assembly & Installation Directions

Deciding the Swivel Setting

Before attaching the Swiveling Hook Plate you need to decide
which swivel setting is best for you. There are 3 different
swivel settings which are shown in Figure 4. Each setting has
its own advantages. The Center Pivot gives you a lot of travel
in each direction but has the thickest profile (See Figure 1 for
Profile Thicknesses). The Left and Right Pivots are the lowest
profile and can swing the farthest either to the right or the left,
but not both.
Figure 4, Maximum Travel of the 3 different Swivel Settings
Install Video at www.DynamicMounting.com/Install
4