Festo VMPA-ASI-EPL 4E4A-Z Series Brief Description page 23

3.4 DIL switch setting
By means of the 4-way DIL switch you can define whether
or not the outputs/valves are to be supplied via the addi-
tional power supply. Proceed as follows when setting the
DIL switches:
1. Pull off the sub-base
(Dismantling the sub-base see section 3.2)
2. Carefully remove the cover
If necessary, unlock the clips on the narrow sides,
e.g. with the aid of a screwdriver.
3. Set DIL switch
4. Refit the cover and the sub-base in the reverse
sequence. (Mounting the sub-base see section 3.2)
Setting
With additional power
supply
Without additional power
supply
1)
black = switch position
(only the settings represented are permitted)
Festo P.BE-K-MPA-ASI-4E4A-Z 1109b English
1
.
6
7
.
DIL switch setting
ON
1 2 3
ON
1 2 3
from the housing.
1)
1, 2: On
3, 4: Off
4
1, 2: Off
3, 4: On
4
23