Safety Instructions - Paradyne 9000 Series Installation Instructions Manual

Safety Instructions

Please read the EMI warning and Important Safety Instructions that come with this unit.
!
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
AT&T Paradyne products are designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact the nearest AT&T Paradyne
Customer Support office.
Removing a NAM from a 1-Slot Housing
Before replacing a NAM, locate or record the access unit's configuration options.
1. Disconnect the power cord/transformer, first from the ac outlet, then from the rear of
the access unit.
2. Disconnect the other cables.
3. Open the 1-slot housing using a small flat-head screwdriver. Gently pry open the
housing at each of the four connecting tab points. However, if the screwdriver is too
big or you do not open carefully, you could cause minor damage to the housing.
4. Remove the cover.
496-15043
2