Connecting To A Dte; Connecting To The Network - Paradyne 7610 SNMP DSU Start-Up Instructions

Connecting to a DTE

Connecting to the Network

6
Procedure
1. Insert one end of the 34-pin V.35 cable into the DTE port.
2. Insert the other end of the V.35 cable into the DTE connector.
TERMINAL MANAGEMENT
POWER
DTE
Procedure
1. Insert the 8-pin connector on the RJ48S network cable into the NETWORK
jack.
2. Insert the other end of the cable into the RJ48S modular jack.
TERMINAL MANAGEMENT
POWER
RJ48S
Jack
November 1997
NETWORK
D
T
E
DTE Port
496-15111
Network
Interface
NETWORK
D
T
E
496-15110
7610-A2-GN10-20