Connecting To The Management Port - Paradyne 7610 SNMP DSU Start-Up Instructions

Connecting to the Management Port

7610-A2-GN10-20
NOTE:
Factory defaults for communications parameters on the Terminal port are
9.6 kbps, 8 bits per character, one stop bit, and no parity.
Procedure
1. Insert the 25-pin end of the EIA-232 cable into the MANAGEMENT port.
2. Insert the other end of the cable into the management interface connector.
This may be on:
— A LAN adapter
— A UNIX workstation
— An external modem
— A router or server
Management
Port
POWER
LAN
Adapter
Async Terminal,
SNMP NMS, or PC
Workstation
NOTE:
Verifying the connection to a LAN, router, or external modem requires setup
and configuration; see Startup , Chapter 3, in the User's Guide.
November 1997
TERMINAL MANAGEMENT
or
or
or
External
Modem
UNIX
NETWORK
D
T
E
AUX
Port
Router or
LAN
Terminal
Server
PSTN
Network
496-15108
5