Mebus 40396 Manual page 22

OVERVIEW OF OUTDOOR SENSOR
D1
D1: LCD displaying outdoor temperature, channel
and outdoor humidity.
D2: Battery compartment
D3: Suspension eye
D4: Channel pushbutton CH
STARTING OPERATION
• Main unit: Remove the battery compartment cover on the backside of the device. Insert 3 new
batteries (type: 1.5 V, AAA) observing the correct polarity.
• The main device can also be operated via the mains adapter provided.
• Replace the batteries when the display quality weakens.
• Outdoor sensor: Remove the battery compartment cover on the backside of the device. Insert 2 new
batteries (type: 1.5 V, AAA) observing the correct polarity.
Once the batteries have been inserted, the clock starts searching for the radio clock signal of the atomic
watch in Frankfurt/Mainflingen. This will take approx. 3 to 10 minutes, provided there is no interference
with the radio communication.
* When receiving the radio signal, the device will automatically set the date and time (DCF77), with the
radio signal icon being displayed at the same time.
D2 D3
D5: °C and °F pushbutton
D6: The hinged stand is located in the battery
compartment (not depicted).
22
D4
D5
D6