Table 4-7 List Of Transfer Addresses That Can Be Set - Hitachi J.NET User Manual

- Transfer byte count
Enter a hexadecimal number as the transfer bytes of each slot.
Setting range
- Transfer address
Enter the starting address to be assigned to each slot, by using the PI/O register format. Table 4-7 List of
transfer addresses that can be set lists the transfer addresses that can be set.

Table 4-7 List of transfer addresses that can be set

No.
1
2
3
4
5
6
7
8
9
10
11
12
(5) When the settings are complete, click the OK button.
If you do not want to save the settings, click the Cancel button.
H01 to H100
Addresses that can be set
PI/O register setting
range
XW0000 to XWFFF0
JW000 to JWFF0
YW0000 to YWFFF0
QW0000 to QWFFF0
GW000 to GWFF0
RW000 to RWFF0
MW0000 to MWFFF0
EW0400 to EWFFF0
FW000 to FWBFF
LBW0000 to LBWFFF0
LWW0000 to LWWFFFF
LXW0000 to LXW3FFF
4-27
Address setting range
H441000 to H442FFE
H0E0200 to H0E03FE
H443000 to H444FFE
H445000 to H446FFE
H0E0800 to H0E09FE
H0E0C00 to H0E0DFE
H447000 to H448FFE
H449080 to H44AFFE
H0E2000 to H0E37FE
H412000 to H413FFE
H450000 to H46FFFE
H4A0000 to H4A7FFE
4. Operation