Figure 4-14 Creation Confirmation Window - Hitachi J.NET User Manual

(3) Enter a name for the new file, and then click the Save button.
When the Creation confirmation window appears, specify a PCs number, select a module (module
number), enter a file comment, and then click the Save File button.
- PCs number
Specify the PCs number. By default, the PCs number of the project selected by BASE SYSTEM/S10VE
is displayed.
Setting range
- Module selection
Select a J.NET module number. Select one of the radio buttons, Module 0 to Module 3.

Figure 4-14 Creation confirmation window

0 to 9999
4-15
4. Operation