Operation; Installing And Starting Up The System; Notes On Installation - Hitachi J.NET User Manual

4. Operation

4.1 Installing and starting up the system

4.1.1 Notes on installation

J.NET SYSTEM/S10VE supports the Microsoft® Windows® 7 (64-bit) operating system and Microsoft®
Windows® 10 (64-bit) operating system.
J.NET SYSTEM/S10VE must be installed from the CD of BASE SET/S10VE. The Microsoft Visual C++
2010 redistributable package (x64) is a prerequisite program for operating BASE SET/S10VE. If you double-
click SETUP.exe (in BASE SET/S10VE) with this program not installed, the following message appears
and installation fails: The program can't start because MSVCR110.dll is missing from your computer. Try
reinstalling the program to fix this problem. Install the Microsoft Visual C++ 2010 redistributable package
(x64) in advance from the Microsoft download center. Before you attempt to install J.NET SYSTEM/S10VE,
make sure that BASE SYSTEM/S10VE (software product model: S-7898-38) has been installed. If BASE
SYSTEM/S10VE has not been installed, install it. J.NET SYSTEM/S10VE cannot be installed if BASE
SYSTEM/S10VE has not been installed.
If you attempt to start BASE SET/S10VE with the Microsoft Visual C++ 2010 redistributable package
(x64) not installed, the following error message appears during startup: The program can't start because
MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem. Then,
BASE SET/S10VE terminates abnormally.
4-1
4. Operation