Commands; Organization Of J.net System/S10Ve Functions; Figure 4-15 Organization Of J.net System/S10Ve Functions - Hitachi J.NET User Manual

4.2 Commands

4.2.1 Organization of J.NET SYSTEM/S10VE functions

Figure 4-15 shows the organization of J.NET SYSTEM/S10VE functions.
Function organization
Online/offline selection
Module selection
(from modules 0 to 3)

Figure 4-15 Organization of J.NET SYSTEM/S10VE functions

Online
Offline
Parameter editing
Refresh cycle
monitoring
Error information
display
Connection changing
Edition file selection
Edition file creation
System info editing
NET1 info editing
NET2 info editing
CSV output
Module error
Station error
: Indicates that the functions enclosed can be used only
when J.NET SYSTEM/S10VE is running in online mode.
4-17
4. Operation
NET1 refresh cycle
setting
NET2 refresh cycle
setting
NET1 status table
address setting
NET2 status table
address setting
ID selection
Station number setting
Station type setting
Refresh cycle setting
Input/output area setting
Slot setting
Transfer area setting