4.1.2 Installation
This subsection describes how to install J.NET SYSTEM/S10VE.
Before starting installation, log on to the system with an administrator account.
(1) To install J.NET SYSTEM/S10VE, double-click setup.exe stored in the CD (BASE SET/S10VE).
(2) After double-clicking SETUP.exe, the following message (Figure 4-1) might be displayed. Click the
Yes button to start setup.
(3) In the SETUP window that appears (Figure 4-2), select J.NET SYSTEM/S10VE and then click the
Install button.
Figure 4-1 User Account Control message
Figure 4-2 SETUP window
4-3
4. Operation