Model
FF-SYA14
FF-SYA30
FF-SYA60
Dimensions in mm / in
2.4.3 Protection Height (FF-SYA14, FF-SYA30 and FF-SYA60 series)
The Protection height is the height on which the test rod will be detected.
2.4.4 Beam spacing and number of beams (FF-SYA234 Series)
For FF-SYA234 multibeam systems for access detection, beam spacing indicates the distance between the optical axis of two
consecutive beams. The beam spacing of the FF-SYA multibeam system and the beam heights above the reference plane are
in compliance with the European standards EN 999.
Model
(Number of beams)
FF-SYA02500
FF-SYA03400
FF-SYA04300
NON COMPLIANCE TO ANSI/RIA 15.06–1999 WITH FF-SYA02500
•
Only the three beam (FF-SYA03400 Series) and the four beam versions (FF-SYA04300 Series) are in compliance with
the beam heights, specified in the US Standard ANSI/RIA R15.06-1999 (Industrial Robots and Robot Systems – Safety
Requirements). The two beam version (FF-SYA02500 Series) does NOT comply with ANSI/RIA R15.06 and may require
additional protection.
•
Refer to applicable standards. In the absence of an applicable standard, ANSI B11.19 and ANSI R15.06 may be used as
reference for the USA, as well as EN 999 (or the relevant European Type C machine standard) for Europe.
8
Resolution R
ø 14 / 0.6
ø 30 / 1.2
ø 60 / 2.4
N
BS
(Beam spacing)
mm
2
500
3
400
4
300
Beam pitch P
10 / 0.4
20 / 0.8
40 / 1.6
Beam heights above the reference plane
(per EN 999)
mm
400 / 900
300 / 700 / 1100
300 / 600 / 900 / 1200
107094-10-EN FR26 GL O 103 Printed in France
Lens size D
4 / 0.16
10 / 0.4
10 / 0.4
In
15.8 / 35.5
11.8 / 27.6 / 43.3
11.8 / 23.6 / 35.5 / 47.3