Table of Contents
Advertisement
5.
Part names and functions
5-1 Front panel
①Display panel
②Error display
③MENU button
④DOWN button
⑤UP button
⑥MODE button
⑦ON/OFF button
⑧POWER switch
⑨Duct connection port
⑩Sample chamber door
⑨
⑩
Displays irradiation time, total lamp ON time, errors, etc.
Flashes when an error occurs.
Use to switch between display units and digit for irradiation time
setting.
Use to change the time or units for irradiation time setting.
Use to change the time or units for irradiation time setting.
Use to select irradiation mode. (Button is lit in AUTO mode.)
Use to turn the lamp on or off. (Button is lit when the lamp is lit.)
Pressing the "I" side of this switch turns on power.
Connect this port to a local exhaust ventilation system or an ozone
decomposition unit E12685 (sold separately), and exhaust the
internal air at an airflow rate of 0.25 to 0.35 m
Door for inserting or removing a sample. The lamp won't light up
when this door is open.
9
①
⑦
3
per minute.
②
③
④
⑤
⑥
⑧
Advertisement
Table of Contents
