Table of Contents
Advertisement
7-5 External control
This unit can be controlled by external control. Use the supplied "external control connector" to
control this unit by external control.
Table 1: Description of external control connector XM2F-1540 (made by OMRON)
Pin No.
1
Manual irradiation (+)
2
Manual irradiation (-)
3
Auto irradiation (+)
4
Auto irradiation (-)
5
Lamp ON signal
6
7
8
9
10
11
12
13
14
15
Signal name
IN/OUT
OUT
Error signal
OUT
N.C.
N.C.
+24
OUT
+24
OUT
+24
OUT
GND
GND
GND
GND
Connector external view and pinout
IN
The lamp lights up as long as pins 1 and 2 are
shorted. (manual irradiation)
-
The lamp lights up by shorting pins 3 and 4 for 100
IN
milliseconds or more. When the lamp is lit in AUTO
mode, shorting pins 3 and 4 for 100 milliseconds or
-
more turns off the lamp.
Outputs a signal (open collector output) as long as
the lamp is lit.
Outputs a signal (open collector output) when an
error such as a lamp error, lamp lifetime error and
fan error occurs.
-
Do not connect.
-
Do not connect.
+24 V DC output (100 mA max.)
-
-
Ground for external control connection
-
-
16
Description
Advertisement
Table of Contents
