Table of Contents
Advertisement
●Do not allow water, liquid or foreign matter to enter the unit.
Water or foreign matter may cause fire or electrical shock.
※If water or foreign matter has entered the unit, immediately stop using it and
consult our sales office or representative for correct servicing.
●Do not touch the unit with wet hands.
Touching it with wet hands may cause electrical shock.
Use extreme caution when handling this unit.
The lamp contained in this unit is made of glass. The mechanical components of this unit
are precisely adjusted.
Excessive vibration and shock may damage the lamp or impair the adjustment, causing
fire or electrical shock.
Do not cover this unit with paper or cloth, and do not place flammable
materials near it.
Doing so may cause fire.
Do not touch this unit during operation or immediately after operation.
The section around the lamp is very hot during operation or immediately after operation.
Touching it may cause burns.
If the lamp is cracked, stop using it.
Operating a cracked lamp may cause electric shock, etc.
Do not use this unit in an atmosphere where flammable materials such as
thinner are present.
Using this unit in a flammable atmosphere may cause explosion or fire.
Do not use this unit in a corrosive atmosphere or in locations subject to
excessive dust.
Using this unit in such locations may cause electrical leakage or overheating.
Do not touch the lamp with bare hands.
If organic matter or decomposed matter adheres to the outer surface of the lamp, the
output intensity may drop.
Replace the lamp when the total lamp ON time has exceeded 1000 hours.
When the total lamp ON time has exceeded 1000 hours, a "forced stop error" occurs and
prevents the lamp from lighting up. In this case, please return the unit to us since we will
replace the lamp with a new one.
CAUTION
5
Advertisement
Table of Contents
